Fine Tuning Coextrusion Crossheads Series

At a glance

Designed to work in single layer and in coextrusion mode.

Equipped with a Fine Tuning System to allow an easier and fine centering adjustment, achieving higher concentricity even on very thin cables.

The crosshead series can process standard and high-viscosity compounds at a lower back pressure, avoiding its overheating.

Totally made of stainless steel with a surface treatment that ensures a hardness higher than 1200 HV and lower friction coefficient.

MAX OPENING TIP Ø MAX OPENING DIE Ø
From 7mm up to 60mm * From 10mm up to 70mm *

* other dimensions available according to customer needs

Processable compounds (e.g.)
PVC LDPE – HDPE – LLDPE PP
Virgin XLPE (Sioplas – Visico)
TPE PUR/TPU
PEEK XLPE FR HFFR LS 0H
XL HFFR
PVC
Filler (HFFR, PVC, EPDM)

General characteristics of Fine Tuning Coextrusion Crossheads Series

This series is developed to work in single layer as well as in coextrusion mode.

The head can be equipped with the Fine Tuning System, instead of a self-centering distributor. This system allows a fine adjustment of the cable centering, achieving high concentricity.

The FT System works with a tip holder movement, by means of 4 scaled screws on the rear. It is possible to switch from FT to centering system at any time, during the cable production, by means of a nut on the rear of the head.

The flow distributor is designed with special shape, high conicity and consequently with bigger diameter in corrispondence of the material inlet, ensuring:

  1. an easy distributor extraction;
  2. a high concentricity in fixed centering;
  3. a lower pushing force of the compound then lower macro-molecular overheating;
  4. a lower working back pressure then higher production speed in according with compound characteristics.

The channels of the flow distributors are developed according to rheological and processual parameters (theorical and empirical) of the compound to be processed. This guarantees lower back pressure and consequentely higher production speed, no material overheating, no material stagnation.

Totally made of hardened stainless steel with a treatment/coating to get a hardness higher than 1200 HV, in order to in order to ensure a lower friction coefficient between compound and head, performing the compound flow and ensuring a longer head lifetime: this allows to tackle the increasing of the loaded compound viscosity and the production needs.

Download the Series information sheet

Technical sheets of the crossheads included in the series

ECF10_FT

Download the technical sheet     ENG     ITA     (Uploading. For any information, please contact our Sales Department)

Get a quote? Contact our Sales Department

ECF20_FT

Download the technical sheet     ENG     ITA     (Uploading. For any information, please contact our Sales Department)

Get a quote? Contact our Sales Department

ECM30_FT

Download the technical sheet     ENG     ITA     (Uploading. For any information, please contact our Sales Department)

Get a quote? Contact our Sales Department

Pressure & semi-pressure tools

Tube & semi-tube tools

Special tools for lower back pressure, lower adhesion, etc.

The distance between tip & die (gum space) can be regulated by a die movement, operating by a frontal nut.

 

 

Connection flange for extruders

Collars

Breaker plates

Flow distributors

Ring for skin

Ring for stripes

By-pass (manual, pneumatic or hydraulic)

Telescopic guide for distributor

Vacuum connector

Head trolley / Head support

Electrical cabinet

Tool case on the top of the head to place tools, etc.

Any other optional according to customer needs