At a glance
Developed to process fluoropolymers and technopolymers. Totally made of Hastelloy® in order to ensure a corrosion and oxidation resistance.
It can work in single layer or in coextrusion mode, with fixed centering and with the possibility to add a fine adjustment system from front.
|MAX OPENING TIP Ø||MAX OPENING DIE Ø|
|From 5mm to 25mm *||From 10mm to 40mm *|
* other dimensions available according to customer needs
Processable compounds (e.g.)
||– – –
General characteristics of Fluoropolymer Crossheads Series
This crosshead series can process fluoropolymers and technopolymers and are totally made of Hastelloy®, in order to get higher corrosion and oxidation resistance.
The round shape ensures the proper heat transmission around the distributor, that is heated by rod or special ceramic band heaters.
The flow distributor has a high conicity in order to:
- get a better cable centering;
- get an easier distributor extraction;
- reduce the shear rate.
The head is equipped with a vacuum connection predisposition. It can work in single layer as well as in coextrusion mode (insulation or jacketing + skin/stripe) and with a fixed centering, with the possibility to add a fine adjustment system from front.
Technical sheets of the crossheads included in the series
|MAX OPENING TIP Ø
||MAX OPENING DIE Ø|
|7mm – 15mm||20mm|
Download the technical sheet ENG ITA (Uploading. For any information, please contact our Sales Department)
Get a quote? Contact our Sales Department
Tube and semi-tube tools
The distance between tip & die (gum space) can be regulated by a die movement, operating by a frontal die nut.
Connection flange for extruders
Ring for skin
Ring for stripes
By-pass (manual, pneumatic or hydraulic)
Telescopic guide for distributor
Head trolley / Head support
Tool case on the top of the head to place tools, etc.
Any other optional according to customer needs