Polyamide Crossheads Series

At a glance

Developed to process polyamide and totally made of premium grade hardened stainless steel in order to guarantee high efficience and long lifetime.

The centering system can be manual with the possibility to have a fine adjustment.

Treatment/coating to ensure a hardness higher than 1200 HV and lower friction coefficient available.

MAX OPENING TIP Ø MAX OPENING DIE Ø
From 10/12mm to 30mm * From 20mm to 40mm *

* other dimensions available according to customer needs

Processable compounds (e.g.)
LDPE – HDPE – LLDPE
PP TPU PA

General characteristics of Polyamide Crossheads Series

This crosshead series is designed to apply an outer layer of polyamide on the cable (jacketing – e.g. THHN cable, TFFN) or an inner layer on the cable.

Totally made of premium grade hardened stainless steel in order to guarantee high efficience and long lifetime.

The distributor has high conicity in order to ensure a performing polyamide flow and a high concentricity of the final product.

The centering system is manual with the possibility to have a fine adjustment.

It is heated by means of band or rod heaters and has a vacuum connection predisposition.

Treatment/coating to ensure a hardness higher than 1200 HV available, in order to in order to ensure a lower friction coefficient between compound and head, performing the compound flow and ensuring a longer head lifetime.

Download the Series information sheet

Technical sheets of the crossheads included in the series

ECMR20_PA

MAX OPENING TIP Ø MAX OPENING DIE Ø
10mm – 12mm 20mm

Download the technical sheet     ENG     ITA     (Uploading. For any information, please contact our Sales Department)

Get a quote? Contact our Sales Department

ECMR40_PA

MAX OPENING TIP Ø
MAX OPENING DIE Ø
30mm 40mm

Download the technical sheet     ENG     ITA     (Uploading. For any information, please contact our Sales Department)

Get a quote? Contact our Sales Department

Pressure and semi-pressure tools

Tube and semi-tube tools

Special tools

The distance between tip & die (gum space) can be regulated by a die movement, operating by a frontal die nut.



Connection flange for extruders

Collars

Breaker plates

Special coating for hardness higher than 1200 HV

Flow distributors

By-pass (manual or pneumatic)

Vacuum connector

Head trolley / Head support

Tool case on the top of the head to place tools, etc.

Any other optional according to customer needs